Sewing a Raglan T Shirt with an Overlocker and Coverstitch
Share
A raglan T shirt is a great project for getting to know your overlocker and coverstitch machine. In this step by step guide we sew a made to measure raglan T shirt in jersey, using an overlocker for the seams and a coverstitch machine for the hems and some decorative topstitching.
We used the baby lock Acclaim overlocker and the baby lock Euphoria coverstitch machine. Jersey can be tricky to sew, but these machines are quick to set up thanks to their needle threaders and air threaded loopers.
Step 1: Measure and trace the pattern
- Measure your bust and the length you would like, then trace the pattern in your size.
- Cut the pattern pieces from jersey in your chosen colour.
- Pin the sleeves to the front of the T shirt, right sides together.


Tip: when jersey is cut on the straight grain, the edges tend to curl towards the right side. That is normal, so do not worry.
Step 2: Sew the sleeves
Sew the sleeves to the front using a four thread overlock stitch, with thread that matches your fabric.



Step 3: Sew in the back
Pin the back piece to both sleeves, right sides together, and sew with four threads on the overlocker.


Step 4: Play with decorative topstitching
The Euphoria has 140mm of space to the right of the needle, so you can sew decorative coverstitch right in the middle of a garment.
A three thread coverstitch with a variegated thread, such as Aeroflock, in the chain looper gives a lovely decorative effect. Always test on a sample first so you can see how it looks.


When you are happy with it, stitch from the wrong side over the front and back raglan seams on both sides. Line the seam edge up with the marks on the foot to keep your stitching accurate.

Step 5: Sew the side seams
Turn the T shirt inside out, pin the side seams and sew them with four threads on the overlocker.

Tip: take care with pins on the overlocker. Remove each one before it reaches the knife.
Step 6: Add the neckband
- Join the neckband into a circle, then fold it in half, wrong sides together.
- Mark the seam with a pin, then use that pin as your starting point to divide the neckband into quarters with pins.
- Divide the neckline of the T shirt into quarters in the same way.
- Pin the neckband to the neckline so the quarter pins match, with the neckband seam at the centre back.
- Sew with four threads on the overlocker, with the neckband on top as you sew, gently stretching it to fit between the pins.
Step 7: Sew the hems
Turn up the hems on both sleeves and the bottom of the T shirt to your chosen allowance, pin, and sew with the coverstitch machine.
For the decorative three thread finish, sew the hem from the wrong side so the variegated thread shows on the right side.

The finished T shirt




If you are thinking about adding an overlocker or coverstitch machine to your sewing room, have a browse of our overlockers and coverstitch machines.
If you'd like help choosing, try our Machine Match or give us a call on 01553 773362.
Enjoy wearing your new T shirt.