Making Snowman Christmas Bunting on an Embroidery Machine
Share
Bunting is a lovely way to bring some Christmas cheer into the house, and this snowman version is made entirely on an embroidery machine, with no hand sewing needed. The hats are a simple appliqué using scraps of leftover fabric, so it is a great way to use up odds and ends too.
Choosing a design
After browsing a few design websites, we chose a snowman design that came in several sizes. That is worth looking out for, as most designs are only sold in one size. Pick whichever size suits the bunting you have in mind.
What you will need
- White felt
- Cotton tear away stabiliser (we used Madeira Tearaway)
- Embroidery threads (we used Brother embroidery threads)
- Ribbon
- Scraps of leftover fabric for the hats

We used the red and black threads for our snowmen.
Setting up on the machine
The on screen prompts make embroidery much less daunting for a beginner. Once you choose a size, the screen shows how many thread colours the design uses, the stitch count and the stitching time.

The machine also checks that the hoop fitted is large enough for the design and will tell you to change it if it is not. Once everything is set, place the felt and stabiliser in the hoop, lock the hoop into place on the machine and start stitching.
Adding the appliqué hats
- Stitch the outline. The machine first stitches an outline showing where the hat will go.
- Lay the fabric over it. Place a scrap of fabric over the outline so it is completely covered.
- Stitch it down. Move on to the next step and the machine stitches the fabric in place.
- Trim the excess. Take the hoop off the machine, leaving the felt in the hoop, and carefully trim away the spare fabric close to the stitching.
- Carry on stitching. Put the hoop back on and continue with the rest of the design.
The screen takes you through each colour in order, but you can choose which step to stitch next. Where the base stitches of the hat used the same thread colour as a later section, we skipped ahead and finished the hat in one go to save rethreading. If you do this, just remember which steps you skipped so you can go back to them.
Adding fabric part way through felt a little nerve racking the first time, but a few YouTube videos and a friend's help soon sorted that out. Once you have done one, the rest are easy.



Finishing the bunting
- Take each finished snowman out of the hoop.
- Cut carefully around the design and trim any loose threads.
- Thread the snowmen together on a length of ribbon.
- Add a few bows, and your bunting is ready to hang.

Which machine?
We stitched this on a Brother Innov-is NV870SE, but the method works on most embroidery machines. If you are thinking about getting started with embroidery, have a look at our embroidery machines.
If you'd like help choosing, try our Machine Match or give us a call on 01553 773362.
Have fun with it, and Merry Christmas from all of us.