Janome MC6700P sewing machine

How to Choose a Sewing Machine for Quilting

Quilting asks a different set of questions of a sewing machine. A machine that is lovely for dressmaking can feel cramped and fussy once you have a double quilt bunched up under the arm, so it pays to know which features really earn their keep before you buy.

Space to the right of the needle

If you only look at one number, make it this one. The space between the needle and the body of the machine (the harp or throat space) is where the rolled up bulk of your quilt sits while you stitch. A standard machine is fine for piecing but hard work once you are quilting a full size top.

As a rough guide:

  • Standard space is comfortable for piecing, table runners, baby quilts and wall hangings.
  • Around eight to nine inches makes quilting a lap or single quilt much less of a wrestle.
  • Ten inches or more is where double and king size quilts start to feel manageable on a domestic machine.

More space usually means a heavier machine, so think about where it will live.

Extension tables

An extension table (sometimes called a slide on or wide table) fits around the free arm and gives you a big flat surface level with the needle plate. It takes the weight of the quilt so it is not dragging against the needle, which keeps stitches even and saves your shoulders. You can see the machines that include one in our machines with an extension table included.

Walking foot or built in dual feed

A quilt sandwich is three layers that all want to move at slightly different rates. The feed dogs grip the bottom, the presser foot drags on the top, and you get puckers or a top that has crept past the backing by the end of a long line.

There are two answers:

  • A walking foot attaches to the machine and has its own set of feed teeth that move the top layer along with the bottom. It works well, but it is bulky and one more thing to swap on and off.
  • Built in dual feed does the same job from inside the machine. You engage it when you need it and tuck it away when you do not.

Each brand has its own name for it (IDT on Pfaff, AcuFeed Flex on Janome, Bernina Dual Feed and so on), and we have written a fuller explanation in what is dual feed. You can see every machine that has it in our dual feed collection.

Free motion quilting and stitch regulators

Free motion quilting is where you drop the feed dogs, fit a darning or free motion foot and move the quilt yourself, drawing with the needle. Almost any machine that lets you drop the feed dogs can do it, but a few things make it far more pleasant:

  • An open toe or clear free motion foot, so you can see where you are heading.
  • A start/stop button and speed control slider, so you can set a steady speed without relying on the foot pedal.
  • Needle stop down, so the quilt cannot shift when you pause to move your hands.

The hardest part is keeping the stitch length even, because it depends on how fast you move the fabric against how fast the needle is going. A stitch regulator senses the fabric moving and adjusts to match, so stitches stay the same length round curves and into points. Bernina's version is the BSR, which we explain in what is BSR, and Brother's is the Intelligent Stitch Regulator. The machines that have one are gathered in our stitch regulator collection.

Knee lift

A knee lift (Bernina and Bernette call theirs the Free Hand System) is a lever that sits by your right knee and raises the presser foot when you push against it. You can pivot or reposition the quilt without taking your hands off the fabric, and once you are used to one it is hard to go back. Our machines with knee lift collection lists them all.

Jumbo bobbins

Quilting gets through a lot of bobbin thread, and running out halfway along a line is annoying. A jumbo bobbin holds noticeably more thread, so you stop to refill less often. Several Bernina machines use one, and you will find them in our jumbo bobbin collection.

Quarter inch and patchwork feet

Accurate piecing depends on a consistent quarter inch seam allowance. If every seam is out by a whisker, the error adds up and your points stop meeting. A quarter inch foot (also called a patchwork or piecing foot) has an edge or guide exactly a quarter of an inch from the needle, so you run the fabric edge along it and get the same seam every time.

Check whether one comes with the machine. If not, you can usually add one later from our machine feet range.

Straight stitch machines

Most quilting is straight stitch, so some quilters choose a dedicated straight stitch machine. These have a single small needle hole rather than a wide zigzag slot, which supports the fabric right round the needle and gives a very crisp stitch. The trade off is that they will not sew zigzag, buttonholes or decorative stitches, so they usually sit alongside an everyday machine rather than replacing it. See our straight stitch machines, or look for an everyday machine that comes with a straight stitch needle plate.

Quilting machines or a longarm?

A longarm is a large frame machine where the quilt is stretched across rollers and you move the machine over it, rather than pushing the quilt under the needle. They suit people finishing a lot of big quilts, but need a room of their own and a much bigger budget. For most quilters, a domestic machine with generous space, dual feed and a good free motion setup will handle the vast majority of projects.

Quilting machines we would recommend

Starting out or on a tighter budget

Janome M50QDC. A sensible first quilting machine that comes with a bonus pack of feet, including a walking foot with quilt guide, a quarter inch seam foot, a ditch quilting foot and a darning foot for free motion. It has a standard 170mm arm space, so it suits piecing and smaller quilts better than big bed quilts.

Brother Innov-is F420. Brother's Square Feed Drive System gives smooth, even feeding through quilt layers, and the F420 adds a knee lifter and 19cm of workspace to the right of the needle. With 140 stitches it is a capable dressmaking machine as well.

More room and built in dual feed

Bernette B77. If space is your main frustration, the B77 gives you 230mm (nine inches) to the right of the needle along with integrated dual feed, so layers feed from above and below without a separate walking foot. The slide on extension table and Free Hand System knee lever are both included, and 35 of its 500 stitches are quilting stitches.

Pfaff Quilt Ambition 635. Pfaff's original IDT system is built in, and the 635 comes with a quarter inch quilting foot designed to work with it, plus a free motion foot. You get 200mm of space to the right of the needle, 201 stitches and a colour touch screen.

Bernina 475QE. Made with quilters in mind, the 475QE has a front loading jumbo bobbin, the Free Hand System knee lifter, a slide on table and Patchwork Foot #37 for quarter inch seams. With around seven inches to the right of the needle it suits piecing and medium sized quilts well, and the BSR is available separately if you want it later. Our Bernina 475QE review goes into more detail.

Serious quilting and bigger quilts

Janome MC6700P. An all metal flatbed machine with 10 inches of workspace, AcuFeed Flex dual feed and a knee lifter. It comes with three needle plates (including a straight stitch plate), a large extension table, a quarter inch seam foot and a convertible free motion quilting foot. As a flatbed it has no free arm.

Bernina 570QE. The one to look at if free motion quilting is your main interest, as the BSR comes in the box along with Bernina Dual Feed. You get 8.5 inches to the right of the needle, a jumbo bobbin, the knee lifter and Patchwork Foot #97D.

Brother Celeste Innov-is CX1. Brother's flagship quilting machine has 285mm (11.25 inches) to the right of the needle and a wide table included, so king size quilts become realistic on a domestic machine. The Intelligent Stitch Regulator is included, along with a compact dual feed foot and a full set of dual feed, free motion and quarter inch feet. At 17kg it needs a permanent home.

A dedicated straight stitch machine

Juki TL-2200QVP Mini. A straight stitch only machine with an aluminium die cast body and industrial style engineering, sewing at up to 1,500 stitches a minute with a slider to bring the speed right down for free motion. It comes with an auxiliary table, knee lifter, even feed foot and quarter inch and open toe quilting feet, and a tap of your heel on the foot control trims the threads.

Still not sure?

Nothing beats trying a machine with a quilt sandwich of your own. Several of these are set up in our King's Lynn showroom (you can see which in machines on display), so give us a ring first and we will make sure the one you are interested in is out and ready for you.

You can also try Machine Match for a free personal recommendation, line up to four machines side by side on our compare page, browse all our quilting machines, or simply call us on 01553 773362 for a chat about what you like to make.

Back to blog